The automatic welding manipulator is generally used in the welding and assembly of large metal objects. It can be used in combination with a welding rotator and a welding positioner to realize a three-in-one welding automatic center. Not only that, as a commonly used welding auxiliary equipment, the welding manipulator can increase the work efficiency of the factory by 50%-70%.
Fengwei Machinery will investigate the use of automatic welding operating machines and upgrade them regularly. It mainly adopts an AC frequency conversion stepless speed regulation device to meet the requirements of uniform and stable speed throughout the work process. The machine head is equipped with an electric cross fine-tuning device. When the welder is welding, when encountering a weld that is difficult to weld, the weld can be fine-tuned to achieve welding accuracy. The automatic welding operation frame can select the welding system according to the user's needs and process, which is convenient for the user's ease of operation. When the cross arm of the machine is raised and lowered, it is equipped with a chain break and slide safety device to ensure the safety of the operator while the machine is working, and the brake device for the column rotation to ensure the safety and reliability of the whole process.
Fengwei Machinery's automatic welding manipulator has designed different models for different usage conditions, including LH-1235, LH-3040, LH-5060, LH-8080, and other models, which have been well-received from all over the world. The effective stroke of the entire cross arm can be from 800mm to 8000, and the effective stroke of the cross arm is mainly 3500mm, 4000mm, 6000mm, 8000mm (two sections), etc. The specific stroke can be customized according to the needs.
There are two main types of automatic welding manipulators, one is a fixed welding manipulator, which uses a base with a slewing bearing to work, and the other is a movable welding manipulator, which can be operated manually or electrically by rails. The way to proceed is to change the position of the machine. Both can be used in combination with other machines. When the welding site is limited, you can choose both to achieve the situation where the space is insufficient and the track cannot be laid.